Free Gift Wrapping!!
Technical data:
- Automatic activation when reverse gear is chosen
- Clearly visible display indicating the direction and distance of obstacle in parking range
- VFD monitor gives distance and angles of objects near vehicle
- Integrated beeper for immediate alert Easy to install, does not require maintenance
More Info:
- Great for business owners who depend on employees to drive their vehicles
- Great gift for senior and student drivers
- Wholesale prices for multiple purchases
- Sensors cover wide angles which gives the driver good parking coverage
- Each sensor has its own separate indicator so driver knows exactly which sensor has detected obstacle
- Sensor Detection Range: 1 - 5.9 feet (0.3m - 1.8m)
- Distance Display in feet Perfect for backing up, street parking, parallel parking, garage parking, and parking in tight spot
- Audible alert with volume control switch (high/low/off).
- Beeping faster if closer to obstacle and continuously if within 0.3m (1.0ft) from the obstacle
- Activated when vehicle is put in reverse
- The backup parking sensor system is designed for rear obstacle detection. It comes with 2 wide angle sensors in the front and 4 wide angle sensors in the rear to give good coverage of your vehicle.
- Once installed in the front and rear bumper, the in-bumper type sensors give the look of factory installed system.
- The system is powered by tapping into the wires of back up light and activated automatically when vehicle is put in reverse.
- The system has both visual digital obstacle distance alert and audible alert (beeper).
- Precise digital obstacle distance display also shows color alert zones (safe/warning/collision zone).
- The display will show STOP with distance displayed as 0.00 when you get within 0.3m (1.0ft) from obstacle to avoid colliding because of the inertia of vehicle while parking.
- Each sensor has its own separated indicator on the display so you know exactly which sensor is beeping for detected obstacle.
- The audible alert (beeper) is built in the display with volume control switch (high/low/off). It beeps faster if vehicle gets closer to obstacle and sounds continuously if within 0.3m (1.0ft) from obstacle
- Sensors work in plastic and metal bumpers.
- The system is built to last, can withstand bad weather and road shock.
- Sensors can also be spray painted to match the color of your vehicle if wanted.
- All connecting wires and necessary parts are included.
- You can install the system yourself by following the installation instructions in the User's Manual or you can have it installed by your local auto mechanic/auto electrician/car stereo store
Additional Technical data:
- CE and ISO9001 Approved.
- Working Voltage: 10-15V DC
- Working Temperature : - 40C to + 80C, allowing the system to work well in different seasons and places.
- Sensor Dimensions: 22mm x 18mm
- Sensor Detection Range : 0.3m - 1.8m (1 - 6 feet).
- Sensor Accuracy: +/- 1.0cm (0.39")
- Sensor Detection Angles: horizontal: 120 degrees; Vertical: 50 degrees.
- Sensor Output Power: 3.8W
- Main System Module: Length x Width x Height = 113mm x 82mm x 25mm (4 7/16" x 3 1/4" x 1").
- Digital Display: 3 digit color VFD (Vacuum Fluorescent Display).
- Distance Display is in feet. Dimensions: Width x Height x Depth = 67mm x 54mm x 13mm (2 5/8" x 2 1/8" x 1/2").
- Alert Zones: Below 0.5m (20") is Collision Zone (Displayed in Red); 0.5m to 0.80m (20" to 31.5") is Warning Zone (Displayed in Yellow); Above 0.8m (31.5") is Safe Zone (Displayed in Light Green).
- Beeper: with volume control switch to set audible alert to High/Low/Off
- VFD Display Cable Length: 6.5m (21 feet).
- Sensor Cable Length: 3.0m (9.8 feet) for each sensor.
- Power Cable Length: 0.94m (3.1 feet) for connection to backup Light and Ground.
- 22mm (7/8") drill bit: precise drill bit to make the exact hole for the sensors.
Package Contains:
- 6 in-bumper type sensors with attached cable
- Cable Length: 3.0m (9.8 feet) black cable for each of the 4 Rear Sensors and 2 Front Sensors.
- Main System Control Box With 3M Self-Adhesive with Velcro attachment for easy mounting to the surface inside the trunk or a waterproof/protected area near or inside the taillight assembly.
- Color VFD Display With 3M Self-Adhesive on the bottom of the base for easy mounting on top of the dashboard.
- VFD Display Cable Cable Length: 6.5m (21 feet) black cable.
- Power Supply Cable Cable Length: 0.94m (3.1 feet) red wire for connecting to backup Light; 0.94m (3.1 feet) black wire for connecting to chassis ground.
- Drill Bit 22mm (7/8") drill bit for plastic bumpers (drill bit for metal bumpers not included
If you would like Free Gift Wrapping, please state so on the comments page during your check out.
|
Automotive Safety 
