Technical data:
- Automatic activation when reverse gear is chosen
- Clearly visible display indicating the direction and distance of obstacle in parking range
- Integrated beeper for immediate alert
- Easy to install, does not require maintenance
More Info:
- Great for business owners who depend on employees to drive their vehicles
- Great gift for senior and student drivers
- Wholesale prices for multiple purchases
- Sensors cover wide angles which gives the driver good parking coverage
- Each sensor has its own separate indicator so driver knows exactly which sensor has detected obstacle
- Sensor Detection Range: 1 - 5.9 feet (0.3m - 1.8m)
- Distance Display in feet
- Perfect for backing up, street parking, parallel parking, garage parking, and parking in tight spot
- Audible alert with volume control switch (high/low/off).
- Beeping faster if closer to obstacle and continuously if within 0.3m (1.0ft) from the obstacle
- Activated when vehicle is put in reverse
- The backup parking sensor system is designed for rear obstacle detection. It comes with 2 wide angle sensors in the front and 4 wide angle sensors in the rear to give good coverage of your vehicle.
- Once installed in the rear bumper, the in-bumper type sensors give the look of factory installed system.
- The system is powered by tapping into the wires of back up light and activated automatically when vehicle is put in reverse.
- The system has both visual digital obstacle distance alert and audible alert (beeper).
- Precise digital obstacle distance display also shows alert zones (safe/warning/collision zone). The display will show STOP with distance displayed as 0.00 when you get within 0.3m (1.0ft) from obstacle to avoid colliding because of the inertia of vehicle while parking.
- Each sensor has its own separated indicator on the display so you know exactly which sensor is beeping for detected obstacle.
- The audible alert (beeper) is built in the display with volume control switch (high/low/off). It beeps faster if vehicle gets closer to obstacle and sounds continuously if within 0.3m (1.0ft) from obstacle.
- Sensors work in plastic and metal bumpers.
- The system is built to last, can withstand bad weather and road shock.
- Sensors can also be spray painted to match the color of your vehicle if wanted.
- All connecting wires and necessary parts are included.
- You can install the system yourself by following the installation instructions in the User's Manual or you can have it installed by your local auto mechanic/auto electrician/car stereo store.
Additional Technical data:
- CE and ISO9001 Approved.
- Working Voltage: 10-15V DC
- Working Temperature : - 40C to + 80C, allowing the system to work well in different seasons and places.
- Sensor Dimensions: 22mm x 18mm
- Sensor Detection Range : 0.3m - 1.8m (1 - 6 feet).
- Sensor Accuracy: +/- 1.0cm (0.39")
- Sensor Detection Angles: horizontal: 120 degrees; Vertical: 50 degrees.
- Sensor Output Power: 3.8W
- Main System Module: Length x Width x Height = 113mm x 82mm x 25mm (4 7/16" x 3 1/4" x 1").
- Digital Display: 2 digit LCD.
- Distance Display is in feet.
- LCD display monitor dimensions: Width x Height x Depth = 67mm x 54mm x 13mm (2 5/8" x 2 1/8" x 1/2"). Please be advised, the display monitor is not nearly as large as it looks in the picture. It is a nice small size with a very clear picture, which allows it to integrate easily inside a vehicle.
- Alert Zones:
- Below 0.5m (20") is Collision Zone
- 0.5m to 0.80m (20" to 31.5") is Warning Zone
- Above 0.8m (31.5") is Safe Zone
- Beeper: with volume control switch to set audible alert to High/Low/Off
- LCD Display Cable Length: 6.5m (21 feet).
- Sensor Cable Length: 3.0m (9.8 feet) for each sensor.
- Power Cable Length: 0.94m (3.1 feet) for connection to backup Light and Ground.
- 22mm (7/8") drill bit: precise drill bit to make the exact hole for the sensors.
Package Contains:
- 6 in-bumper type sensors with attached cable
- Cable Length: 3.0m (9.8 feet) black cable for each of the 4 Rear Sensors and 2 Front Sensors.
- Main System Control Box with 3M Self-Adhesive with Velcro attachment for easy mounting to the surface inside the trunk or a waterproof/protected area near or inside the taillight assembly.
- LCD Display with 3M Self-Adhesive on the bottom of the base for easy mounting on top of the dashboard.
- LCD Display Cable
- Cable Length: 6.5m (21 feet) black cable.
- Power Supply Cable
- Cable Length: 0.94m (3.1 feet) red wire for connecting to backup Light; 0.94m (3.1 feet) black wire for connecting to chassis ground.
- Drill Bit
- 22mm (7/8") drill bit for plastic bumpers (drill bit for metal bumpers not included)
|
Automotive Safety 
