Free Gift Wrapping!!
Technical data:
- Automatic activation when reverse gear is chosen Integrated beeper for immediate alert
- Beeps and also has distance alarm
- Easy to install, does not require maintenance
More Info:
- Great for business owners who depend on employees to drive their vehicles
- Great gift for senior and student drivers
- Wholesale prices for multiple purchases
- Sensors cover wide angles which gives the driver good parking coverage
- Each sensor has its own separate indicator so driver knows exactly which sensor has detected obstacle
- Sensor Detection Range: 1 - 5.9 feet (0.3m - 1.8m)
- Distance Display in feet
- Perfect for backing up, street parking, parallel parking, garage parking, and parking in tight spot
- Audible alert with volume control switch (high/low/off).
- Beeping faster if closer to obstacle and continuously if within 0.3m (1.0ft) from the obstacle
- Activated when vehicle is put in reverse
- The backup parking sensor system is designed for rear obstacle detection. It comes with 4 wide angle sensors to give good coverage of the rear end of your vehicle.
- Once installed in the rear bumper, the in-bumper type sensors give the look of factory installed system.
- The system is powered by tapping into the wires of back up light and activated automatically when vehicle is put in reverse.
- The system has both visual digital obstacle distance alert and audible alert (beeper).
- Precise digital obstacle distance display also shows color alert zones (safe/warning/collision zone).
- The display will show STOP with distance displayed as 0.00 when you get within 0.3m (1.0ft) from obstacle to avoid colliding because of the inertia of vehicle while parking.
- The audible alert (beeper) is built in the display with volume control switch (high/low/off). It beeps faster if vehicle gets closer to obstacle and sounds continuously if within 0.3m (1.0ft) from obstacle
- Sensors work in plastic and metal bumpers.
- The system is built to last, can withstand bad weather and road shock.
- Sensors can also be spray painted to match the color of your vehicle if wanted.
- All connecting wires and necessary parts are included.
- You can install the system yourself by following the installation instructions in the User's Manual or you can have it installed by your auto mechanic or car stereo installer
Additional Technical data:
- CE and ISO9001 Approved.
- Working Voltage: 10-15V DC
- Working Temperature : - 40C to + 80C, allowing the system to work well in different seasons and places.
- Sensor Dimensions: 22mm x 18mm
- Sensor Detection Range : 0.3m - 1.8m (1 - 6 feet).
- Sensor Accuracy: +/- 1.0cm (0.39")
- Sensor Detection Angles: horizontal: 120 degrees; Vertical: 50 degrees.
- Sensor Output Power: 3.8W
- Main System Module: Length x Width x Height = 113mm x 82mm x 25mm (4 7/16" x 3 1/4" x 1").
- Digital Display: 3 digit color LED Distance Display is in feet.
- Dimensions: Width x Height x Depth = 67mm x 54mm x 13mm (2 5/8" x 2 1/8" x 1/2").
- Alert Zones: Below 0.5m (20") is Collision Zone (Displayed in Red); 0.5m to 0.80m (20" to 31.5") is Warning Zone (Displayed in Yellow); Above 0.8m (31.5") is Safe Zone (Displayed in Light Green).
- Beeper: with volume control switch to set audible alert to High/Low/Off
- LED Display Cable Length: 6.5m (21 feet).
- Sensor Cable Length: 3.0m (9.8 feet) for each sensor.
- Power Cable Length: 0.94m (3.1 feet) for connection to backup Light and Ground.
- 22mm (7/8") drill bit: precise drill bit to make the exact hole for the sensors.
Package Contains:
- 4 in-bumper type sensors with attached cable
- Cable Length: 3.0m (9.8 feet) black cable for each of the 4 Rear Sensors.
- Main System Control Box With 3M Self-Adhesive with Velcro attachment for easy mounting to the surface inside the trunk or a waterproof/protected area near or inside the taillight assembly.
- Color LED Display With 3M Self-Adhesive on the bottom of the base for easy mounting on top of the dashboard.
- LED Display Cable Cable Length: 6.5m (21 feet) black cable.
- Power Supply Cable Cable Length: 0.94m (3.1 feet) red wire for connecting to backup Light; 0.94m (3.1 feet) black wire for connecting to chassis ground.
- Drill Bit 22mm (7/8") drill bit for plastic bumpers (drill bit for metal bumpers not include)
|
Automotive Safety 
